Image 1

9mm 160 Gr. RN

×
×
Rating:
Price:
$0.00
Weight:
0.00 LBS
Shipping:
Calculated at checkout
Quantity:
  • Product Description

    9mm 160 Gr. RN - Sized to .356 (Typical) Other sizes available upon request call or email for options.

    Originally designed for the .38 Super, this bullet is gaining popularity with IDPA and USPSA shooters alike.

  • Product Reviews

    ×

    Write A Review

    1. There's Gold in the Bayou

      I received my test batch of 100, 9mm 160gr gold coated round nose bullets. On initial observation I noticed they all looked the same, that is to say there were no bare spots and the coating was very even. The purpose of the load test is for a new Sig P320 X5. Testing for minor PF and to see if the loads land in the same area as other loads, proving this gun can shoot anything in the same area <3.5" circle @ 20 yards. Which they did.
      The first load tested was 2.9 gr of TG, 5 rnds 7/8" x 1.25". Way beyond satisfied with these Bullets. I'll be ordering more shortly.
      on 21st Aug 2017

    2. Great for low recoil

      the 160gr bullets with 2.6gr of Titegroup make a real mild recoil. I have yet to crono the loads to see if they will make the power factor for competition. I have ran a couple hundred through a Glock 17 and it works great. The only think I noticed was that the big bullets and Winchester cases don't like each other. So I weeded out the Winchesters and it cycles 100% through a stock Glock. on 25th Jul 2017

    3. Great bullet for the 929 revolver

      Loaded behind 3.0 grains of VV 320 shoots about just over an inch at 25 yds. Accurrate, loads well what else could you ask for. Great shipping, multiple colors. on 22nd Jul 2017

    4. Great in my DW PM-9

      I have been shooting these with 3.4gr of BE-86.
      Very accurate. Consistent weight.
      on 6th Jul 2017

    5. Excellent heavy for caliber bullet!

      160 grain bayou bullets are my new favorite load for 9mm! on 24th May 2017

    6. First try at 160s

      First, received them in THREE days! Loaded at 1.140 for a 1911 with 2.6 of BE (til I ran out) and 2.7 of TG. Shoot noticeably softer than the plated 147s I've been using and a tad lower. Couple clicks on the rear sight and good to go. Stay away from CBC and Aguila cases. Shot a couple hundred checking function and sights so far
      .
      on 13th May 2017

    7. Fast shipping

      I run these in my PCC. It shoots flat with almost no dot movement. on 13th Apr 2017

    8. Economical, Accurate, Clean -- what more can you ask for

      I shoot a Smith 929 for ICORE & USPSA revolver and my favorite load is the Bayou 160g bullet over a fast powder like VV N320 or Ramshot Silhouette. The bullets are accurate, economical, and the loads produce very little recoil. Also, I don't notice much difference between the coated bullets and plated or jacketed bullets when it comes to barrel fowling, and there is definitely not the smoke from shooting simple lead. on 14th Mar 2017

    9. Accurate and feels like shooting a 22

      Run these in my 1911 for IPSC and USPSA SS Minor. Not only are they stupid accurate they are also extremely soft shooting. Almost like nothing is there. Excited to develop a load for my CZ in Production. on 28th Oct 2016

    10. great product

      Shipped fast, if you're looking for a low felt recoil load these are perfect. Loaded with 2.8 grains Bullseye at 1.145", 20 shot average of 827fps out of 5" barrel. Easily makes PF. on 15th Sep 2016

  • Find Similar Products by Category

×
×