9mm 135 Gr. RN - 1000 Ct.

Write A Review

1. Great Multi-Purpose Bullet

   I wanted to put together a load using this bullet for my Carry Optics CZ. I've previously had good success with Bayou bullets in my Limited CZ. This bullet has a easy feeding profile for my CZ running at an OAL of 1.125". When loaded to USPSA minor the 135g bullet works better for me than many of the heavier 9MM. As a bonus, this bullet/load combination feeds and runs well in my PCC. W. on 16th May 2017

2. Bayou 135gr. 9mm bullets

   Excellent stuff....consistent dimensions and accuracy. Cody RayFAIRWAY on 13th Apr 2017

3. Excellent

   Bayou polymer coated bullets have performed very well. Lead is completely encapsulated. No lead exposure while reloading.
   Consistent quality. Shoot accurately.
   No more copper plating splatter from indoor trap or outdoor steel plates.
   No barrel fouling.
   Have been using .38 wadcutters in SW52, 1911 National Match mid-range, 9mm in many including Glock, .45 230g RN in many including plastic guns.
   Price initially attracted my attention Chip on 5th Apr 2017

4. Good looking bullet, fast delivery!

   I have not loaded these yet, but will fit them into my loading cycle soon. I did find data in Oregon Trail manual. I have tried 135gr. before, and found them to be very accurate in my CZ. Gary on 30th Mar 2017

5. 135 gr. 9mm

   Have loaded about 500,(order another 2k) great accuracy in my 3 9's . servic is fantastic..Had my order in 4 days..to Ca. Unknown on 20th Feb 2017

6. 135 gr 9mm, perfect for minor power factor

   This is my uspsa minor projectile. Running with a fast powder just under 1000fps it's very soft and still quick. johnbu on 19th Oct 2016

7. Quick Service

   I ordered 1000 bullets last week, they were delivered to NJ in 2 days. Can't expect faster service than that. Haven't shot 'em yet, but looking forward to doing so. Unknown on 30th Sep 2016

8. great product

   Great product super fast shipping. Peter on 15th Sep 2016

9. excellent for IDPA

   These are my new go to bullets for IDPA 9mm loadings. Soft push recoil impulse with a minimal charge of tite group gets me to needed power factor with excellent accuracy. The coating results in clean hands during loading and no smoke at firing. Steve on 17th Aug 2016

10. Tight groups, clean, small amount of smoke

    Ran a couple hundred rounds through a Walther PPQ M2, Glock 34 w/ Zev tech barrel, stock Glock 19, and a Sig 226. 3.3 gr Titegroup seated to 1.150" OAL w/ CCI small pistol primers. Ran well, clean, small amount of smoke.. Have been shooting 147gr Berry plated, slightly more recoil at 130 PF than the 147 Berry's but the slide cycles faster with these, also better groups. Great IDPA load that will meet PF out of a 5" barrel. Taylor C on 8th Aug 2016