9mm 120 Gr. TC

Write A Review

1. Outstanding bullet for competition in USPSA Production division

   I use this bullet for my "pet" USPSA production load. Over 3.5 grains Titegroup @ OAL of 1.045" this gives me a consistent and accurate load. It chrono's at 1109 FPS / 133 Power Factor in a 5.25" XD-M.
   Be careful not to load these bullets long, as they will bind up chambering and/or unloading a chambered round if you do. This is not a problem as long as you work out a reliable load *in your gun* before match day. John MacLean on 14th Aug 2017

2. awesome bullets!

   I love these bullets. I have found them to be very accurate, and shoot great out of all of my guns. The coating keeps the barrel clean, almost like shooting jacket bullets. Best of all, I don't get a cloud of smoke when I shoot like I did when shooting lead bullets. Wade Baringer on 14th Jun 2017

3. 5 star customer service

   Customer service is excellent. I ordered a sample pack of 100 bullets to try them out. They were shipped the same day as ordered, that was followed up by an email to check if I had any questions or concerns about the product. The bullets load easy and are accurate, first time with coated bullets. Plan to reorder. Frank J. Ribarich, Jr. on 28th May 2017

4. Clean, accurate, and good value.

   Having loaded many thousands of bullets from Bayou Bullets, I most recently tried the 120 gr TCG bullets in 9mm. These bullets are outstanding and a good value. Unknown on 23rd May 2017

5. I really want this mold

   This seems to be the perfect 9 mm bullet it leaves almost wadcutter like holes, feeds perfectly in all my pistols, and does not lead.
   It also has a much longer taper than my cast tc Bullets allowing me to load them longer to reduce case pressure. They are the wrong color but I only picked a color because I had to and had no actual preference. Lee Clifton on 14th Apr 2017

6. very nice bullets

   Been shooting cast bullets for years and I am really liking these coated bullets so munch cleaner I'll never go back to cast bullets after shooting these. D W Bales on 10th Mar 2017

7. very accurate in my XDm

   I got a sample pack of 100, and these proved very accurate in my XDm shooting groups at 35 yards (3.6 grains Bullseye, OAL 1.13"), so I ordered a case. I plan on using these for USPSA and IDPA in 2017. John MacLean on 5th Mar 2017

8. Consistently accurate.

   I use these bullets sized to .358 for my .38 spl revolver. Loaded to an OAL of about 1.455" with Winchester W231 or WST they are great shooting bullets. M. Johnson, Clifton, VA on 23rd Feb 2017

9. excellent quality product

   This has been my go to bullet maker for several years. Highly recommended. Mark Dziamski on 14th Feb 2017

10. Accurate

    I believe that my groups are tighter with these coated bullets. I also got the setup right so that there is practically no scraping of the coating when reloading with these bullets. I almost gave up on these because of the scraping during bullet seating, which caused a lot of time spent in removing the scrapings from around the cartridge so that they would seat properly in the chamber. WIth the proper amount of flare and making sure the seating die does not excessively crimp, and then using the Lee factory crimp die, there is no scraping. I highly recommend Bayou Bullets. Thomas Kilgore on 7th Feb 2017